 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Infrared Light Emitting Diode in SMD Plastic Package OP270 Series * * * * * 890nm Wavelength Narrow Beam Angle High Power 1.9mm Water Clear Plastic Package Four Lead Configurations Description: The OP270 series are GaAlAs infrared LEDs mounted in a clear plastic SMT packages. The devices incorporate an integral molded lens which enables a narrow beam angle and provides an even emission pattern. This series is available with four lead configurations and is compatible with most automated mounting equipment. The OP270 Series LEDs are mechanically and spectrally matched to the OP570 series phototransistors. Applications * * * Non-Contact Position Sensing Datum detection Machine automation * * * Optical encoders IrDA Reflective and Transmissive Sensors Relative Radiant Intensity vs. Angular Displacement 100% OP272 OP271 OP273 Relative Radiant Intensity 80% 60% 40% OP270 20% 0% -90 -60 -30 0 30 60 90 Angular Displacement (Degrees) Pb RoHS A subsidiary of TT electronics plc Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.-- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323- 2396 sensors@optekinc.com www.optekinc.com SMD Infrared LED OP270 Series Absolute Maximum Ratings (TA = 25o C unless otherwise noted) PARAMETER Continuous Forward Current Power Dissipation Reverse Voltage Peak Forward Current (1s pulse width, 300 pps) Lead Soldering Temperature (1.6mm to epoxy for 5 sec.) Operating Temperature Range Storage Temperature Range Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. De-rate linearly at 2.17 mW/ C above 25 C. TSOL TOPR TSTG 260 -40C to +85C -40C to +100C C SYMBOL IF Pd IR IFP MAXIMUM 50 130 2 1 UNITS mA mW V A Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL Ee(APT) VF IR P HP tr, tf 3. PARAMETER Apertured Radiant Incidence Forward Voltage Reverse Current Peak Emission Wavelength Emission Angle at Half Power Points Rise and Fall Time MIN 1.5 TYP MAX UNITS mW/cm 2 CONDITIONS IF = 20mA IF = 20mA VR = 2.0V IF = 10mA IF = 20mA IF(PEAK) = 100mA, PW = 10s, 10% D.C. (3) 1.5 100 890 25 500 V A nm Deg. ns Ee(APT) is a measurement of the apertured radiant incidence upon a sensing area 0.081" (2.06mm) in diameter, perpendicular to and centered on the mechanical axis of the lens, and 0.590" (14.99mm) from the measurement surface. Ee(APT) is not necessarily uniform within the measured area. 350% 300% Relative Radiant Intensity vs. Forward Current vs. Temperature Normalized at IF = 20mA, TA = 20C. Temperatures stepped in 20C Increments Forward Voltage vs. Forward Current vs. Temperature 1.5 Temperatures stepped in 20 C Increments -40C -40C Relative Radiant Intensity 1.4 Forward Voltage (V) 250% 200% 150% 100% 50% 100C 1.3 100C 1.2 1.1 0 10 20 30 40 50 1.0 0 10 20 30 40 50 Forward Current (mA) OPTEK Technology Inc.-- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323- 2396 sensors@optekinc.com www.optekinc.com Forward Current (mA) Issue A.3 07/08 Page 2 of 3 SMD Infrared LED OP270 Series OP270 OP271 1 2 PIN 1 2 LED A K PIN 1 2 LED A K OP272 OP273 1 2 PIN 1 2 LED A K PIN 1 2 LED A K OPTEK Technology Inc.-- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323- 2396 sensors@optekinc.com www.optekinc.com Issue A.3 07/08 Page 3 of 3 |
Price & Availability of OP270
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |